Ebode IP Vision 38 Betriebsanweisung PDF herunterladen (Seite 10)

7-11-2013 10 IPV38 / IPV38WE

After clicking submit, wait about 30 seconds, the camera will reboot, then unplug the

network cable. In most cases you will need to login to the camera again. You can use the

“IPCamera Tool” from step 3 for this or enter the Camera`s IP address in your web browser.

In case you cannot find the IP Camera after 30 seconds rebooting please wait a little longer.

If you still cannot find your Camera using the IPCamera Tool, there might be used a wrong

type of Encryption or Password. Please also check that you selected the right SSID since the

camera might also pick up more signals from other routers. Maybe from your neighbors?

To view the camera’s image from outside the network, for example at work, school or at

your friends or family’s house, you need to setup some additional settings found in the full

manual. Please go to step 3.6 UPnP Settings to set this up. Important: please make sure

you reconnect your camera with your router via the network cable, before you start the

UPnP setup.

There is a full version of the manual on the CD that comes with your camera, but we suggest

you go to www.ebodeelectronics.eu for the latest version of the manual. We update this

manual regularly.

For more details, support, FAQ and the full version of the manual or the “up to date” version

of this Quick Start Guide, please visit our website at www.ebodeelectronics.eu.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 83 84

Keine Kommentare

Ebode IP Vision 38 Betriebsanweisung Seite 10